Skip to main content

NBC224SS00 Internal Fan Replacement

Caleb Quiatchon
  • Updated

 

Difficulty

Tools Needed:

  • Phillips screwdriver

 

  1. Open the door of your unit and remove all the racks. Once removed, unscrew the back wall by removing the screws pictured below.
    IMG_6853.JPG


  2. Peel away the wall from the top and disconnect the fan as well as the temperature sensor. Below shows the corresponding connections.
    IMG_7301.JPG

  3. Unscrew the fan and fan guard from the front. Note the orientation of the fan, then begin your replacement, screwing the fan into position along with the guard.
    IMG_7303.JPG

  4. Reconnect your wires that were disconnected in step 2. Once those two wires are reconnected, hold the back wall in place. Insert your screws from the top first then work your way down. 

    IMG_7304.JPG

 

 

 

ONLINE SUPPORT

 

Send us a message through our live chat messenger at Newair

 

Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)

 

Call our support team: 1 (855) 963-9247