Difficulty
Tools Needed:
- Phillips screwdriver (PH1)
-
Open and remove the shelves as needed to access the screws around the display panel. There are two on top and two on the bottom.
-
Use your PH1 size screwdriver to unscrew the display board from the panel.
-
Remove the display board from its socket and disconnect the wire. Now you can replace the display board.
-
Make sure the springs and the LCD are aligned in their respective sockets before you secure the display into place.
ONLINE SUPPORT
Send us a message through our live chat messenger at Newair
Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)
Call our support team: 1 (855) 963-9247