Difficulty
Tools Needed:
- Phillips screwdriver size PH1
- Flathead screwdriver or wedge
- Locate the display board and use your flathead driver to pry it off.
- Unplug the wire connector from the terminal.
-
Use your size PH1 driver to unscrew the PCB from the display cover.
- Replace with your new board and make sure the springs are aligned in their slots.
ONLINE SUPPORT
Send us a message through our live chat messenger at Newair
Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)
Call our support team: 1 (855) 963-9247