Skip to main content

NBC224SS00 Display board / Lights Replacement

Caleb Quiatchon
  • Updated

Difficulty

 

 

Tools Needed:

  • Phillips screwdriver

 

  1. Remove your shelves and turn your attention to the ceiling of the unit behind the display.
    IMG_6860.JPG


  2. Remove these two screws near the light behind the display.
    IMG_6862.JPG

  3. The display/light cover can now be pulled from the unit.
    IMG_6863.JPG

  4. Disconnect the display board and the LED light board.
    IMG_6864.JPG

  5. Unscrew the display board and replace it. Make sure the springs are aligned in the designated slots.
    IMG_6866.JPG


  6. Now unscrew the LED light board and replace it. Make sure all the LED nodes are inserted in the pre-drilled holes before screwing it to place. 
    IMG_6867.JPG


  7. Make sure the wires are connected then slide the display/light cover into place. Screw in the cover with the screws removed from step 2. 
    IMG_6868.JPG

 

ONLINE SUPPORT

 

Send us a message through our live chat messenger at Newair

 

Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)

 

Call our support team: 1 (855) 963-9247