Skip to main content

NBC224SS00 Temperature Sensor Replacement

Caleb Quiatchon
  • Updated

Difficulty

 

Tools Needed:

  • Phillips screwdriver

 

  1. Open the door of your unit and remove all the shelves. Unscrew and remove the temperature sensor cage shown below.
    IMG_6852.JPG


  2. Remove all these screws to release the back panel.
    IMG_6853.JPG
  3. Peeling the back wall may result in the fan disconnecting. Remember to reconnect the fan after the temperature sensor replacement.
    IMG_6854.JPG


  4. Replace the temperature sensor. 
    IMG_6856.JPG

  5. Insert the temperature sensor through the slot from the backside. Make sure the fan is reconnected from behind.
    IMG_6858.JPG

  6. Attach the cage to the temperature sensor and screw it in place. Screw the back panel into position as well.
    IMG_6859.JPG

 

 

ONLINE SUPPORT

 

Send us a message through our live chat messenger at Newair

 

Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)

 

Call our support team: 1 (855) 963-9247