Skip to main content

NBF125BK00 / SBF125AB00 Internal Fan Replacement

Caleb Quiatchon
  • Updated

Difficulty

 

 

Tools Needed:

  • Phillips screwdriver
  • Scissors / wire cutters

 

  1. Open the unit and locate and remove the screws from the back panel shown below.
    IMG_6691.JPG

  2. Remove the 4 silver screws surrounding the fan.
    IMG_6692.JPG


  3. Cut the zip ties securing the fan wires and disconnect the red-white connector.
    IMG_6694.JPG


  4. Remove the grounding wire secured by the screw on the fan. 
    IMG_6701.JPG


  5. Replace your fan and secure it to the wall with the sticker side facing away. Connect the fan's red connector to the white connector. Don't forget to screw on the grounding wire onto the fan.
    IMG_6702.JPG

  6. Place the back panel into position. Secure the clips into these slots on the back wall.
    IMG_6704.JPG

  7. Screw on the back panel onto the back wall.
    IMG_6705.JPG

 

 

 

ONLINE SUPPORT

 

Send us a message through our live chat messenger at Newair

 

Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)

 

Call our support team: 1 (855) 963-9247