Skip to main content

NWC007SS00 Display Board Replacement

Caleb Quiatchon
  • Updated

Difficulty

Tools Needed:

  • Phillips Screwdriver
  • Hook pick tool/needle (sharp tool)

  1. First open the unit and remove all the shelves.
    IMG_6502.JPG
  2. Use your sharp tool to strip away the adhesive display panel.
    IMG_6503.JPG
  3.  Under, you will find 2 pairs of springs with a screw between them. Unscrew to remove the plastic display shell.
    IMG_6504.JPG

  4. Behind the shell reveals the display board. Locate the connector behind the board and begin your replacement.IMG_6506.JPG

  5. After replacing the board, set in place and screw back on the display shell.
    IMG_6507.JPG

  6. Carefully place the adhesive control strip over the shell to envelop the springs to complete your display board replacement.
    IMG_6508.JPG



ONLINE SUPPORT

 

Send us a message through our live chat messenger at Newair

 

Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)

 

Call our support team: 1 (855) 963-9247