Skip to main content

6.7 Cu. Ft. Chest Freezer Light Replacement

Caleb Quiatchon
  • Updated

Difficulty

 

 

Part Needed: NFT070-Light

LED light for all 6.7 cubic feet chest freezers.

Tools Needed:

  • Phillips screwdriver

The following unit used for this demonstration is an NFT070MB00.

 

  1. First open your freezer door and locate the LED light cover.
    IMG_6336.JPG

  2. Remove the two screws shown below to release the cover.
    IMG_6337.JPG


  3. Behind the cover is the LED light board fastened by two screws on opposing corners and connected by red and black wires. Disconnect the wires and remove the screws, and then replace the board. 
    IMG_6338.JPG
    IMG_6339.JPG

  4. Once the light board is replaced, screw back on the cover. Your LED light replacement is complete.

 

 

ONLINE SUPPORT

 

Send us a message through our live chat messenger at Newair

 

Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)

 

Call our support team: 1 (855) 963-9247