Difficulty

Part Needed: NOF-EvapFan

Internal Evaporator fan for the outdoor commercial fridge series. Applies to all NOF units and NCR032SS00.

The following unit used for this demonstration is an NOF090SS00.

Open your unit and remove all the racks to gain access to the back panel.
Locate and loosen these screws to release the back panel. Don't completely remove the panel yet.
Remove the screws on the fan grill to release the fan.
Open the panel and locate the red and black wire. Cut the zip tie and disconnect the fan from the unit.
Replace and connect your new fan into your unit.
Zip tie the fan wire to remove tension on the connector if the wire is tugged.
Now secure the fan onto the panel as shown below and fasten the fan grille on the other side.
Secure the panel back into position and fasten with screws.