Skip to main content

NKR058MB00 PCB Replacement

Caleb Quiatchon
  • Updated

Difficulty

Tools Needed:

  • Phillips Screwdriver
  1. Before starting, please make sure your unit is unplugged. Turn to the back side and use your screwdriver to remove the grill.
    IMG_6188.JPG

  2. Unscrew the left chrome brace under the protruding black PCB box.
    IMG_6189.JPG

  3. The black PCB cover has screws on the bottom, left, and right. This will need to be removed. If the refrigerant line obstructs your working space, you may bend it out of the way since it is tensile. 
    IMG_6190.JPGIMG_6192.JPGIMG_6191.JPG

  4. With the black cover removed, PCB can be found mounted by 4 screws. Remove these to free up the PCB. 
    IMG_6193.JPG

  5. There is a total of 3 wire assortments to remove. They are located at terminals "CN1", "CN3", and "CN4". Once removed, replace your PCB. 
    IMG_6194.JPG

  6. To assemble the unit, backtrack from steps 5 to 1. 

ONLINE SUPPORT

 

Send us a message through our live chat messenger at Newair

 

Send us an email at support@newair.com(We will respond to you within 24 hours during our normal business hours: M-F from 8-4pm PST)

 

Call our support team: 1 (855) 963-9247