| Possible Causes |
Solution |
| No power |
Verify unit is plugged into a working outlet |
| The temperature setting is off |
Turn to the on position |
| The temperature dial is damaged (can rotate all the way around) |
Replace the dial |
| The dial is turned to an invalid area |
Rotate the dial to the middle. If the temperature is cooling normally, adjust to desired temperature |
| The light flashes |
NTC1 is damaged, Replace |
| Power on again after unplugging and the light comes on for about 2 seconds |
NTC2 is damaged, Replace |
| The compressor does not vibrate |
The compressor, starter, or protector may be damaged |
| The compressor is vibrating |
Capillary plug or refrigerant leak |
| Storing too many beverages without adequate cooling time |
Allow longer cooling time |
