Difficulty

Stand unit upright and locate hinge cover on the top right.
Pry off the hinge cover with your flathead screwdriver.
Under the hinge cover, disconnect the LED display wires of the door from the unit.
Using your Phillips screwdriver, unscrew the hinge.
Carefully lift the door from the bottom hinge bushing.
Align the bottom hinge socket of your new door to the bottom hinge bushing as shown.
Your new door replacement should come with the top hinge threaded through the LED display wires. Connect the wire assortment of the new door to your unit. and fasten the hinge. Make sure the door is aligned before tightening the screws.
Tuck in the wires under the hinge cover. The cover should fit snug over the hinge. Check the door alignment by opening and closing it. Your replacement is now complete.